| Yaesu FT-950 pierwsze wrażenia z grup dyskusyjnych |
| This update procedure is for the FT-950 MAIN and EDSP software. The MAIN software is for all lot numbers. The EDSP software is different. Please verify the version of the radio by the serial number. The third and fourth digits indicate the lot number, example xx42xxxx. For lots 01 thru 42 proceed with MAIN and EDSP software update. For lots xx43xxxx and above install the MAIN only, do not install the EDSP software. You may also verify the current EDSP level of your radio (The software versions can be displayed on the radio, see the below instructions). If the first digit of the number is 2 (example 20.45 1.13) Do not install this update EDSP software, It is not compatible with EDSP level 2 radios. Radios with lot numbers 43 and above, cannot operate with EDSP Ver. 11.54 software. At this time (7/12/2010) there are no updates for EDSP level 2 radios. PEP950 This procedure is used to update Main CPU Ver. 0116 and EDSP Ver. 11.54 the flash programming for the FT-950 Transceivers. We recommend installing the Flash Programming Software on a PC computer with Windows 2000, XP or Vista Operating System; and use the serial cable RS-232C, DB9F to DB9F straight cable. NOTE: There are many USB adapters available; however some may not function with this software. We recommend using the latest USB adapter driver software when available. The software versions can be displayed on the radio While holding the three buttons [GEN]＋[50]＋[ENT] turn the radio on. The software version will be displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation. See below: Example EDSP V11.53 and MAIN V1.12 software version. *If you already have EDSP V11.54 or V20.45, and MAIN V0116 software versions, it is not necessary to update the FT-950 again. The software updates will work with all versions (AF, AS, EU, NA, OC, SA or all Countries) of the FT-950. Main CPU: Software version 01XX (This image & version is for illustration only) EDSP: Software version 11.XX (This image & version is for illustration only) Ver. 0116 MAIN CPU implements improvements (9/29/11) (This update Ver. 0116 MAIN CPU is for the FT-950 ALL lot numbers 01 to XX) • Long press the [RX-B] button, to access TRACKING MENU; long press the [RX-B], again to toggle back to normal. • The beacon setting MENU time is changed. The new setting is up to 690 seconds. • Corrected the DMU (SCP) FIX mode, upper band limit out of range. Ver. 11.54 EDSP implements improvements (4/5/10) (This update Ver. 11.54 EDSP is only for the FT-950 lot numbers 01 to 42) • Corrected FM TX for a slight frequency offset. NOTES: *Rotate the [METER] switch to select “COM” (Compression). We recommend setting the PROC level within the 5dB to 10dB range. *When menu settings are saved on the DMU-2000 CF card and transferred to the new version, some previous versions may not transfer correctly. Please check your menu, update the settings, and then save the new settings to the CF card. może ktoś na szybko prztłumaczyć ? |