| Yaesu FT-950 pierwsze wrażenia z grup dyskusyjnych |
| coś się ruszyło z naszym trx-em 9/9/10 VERY IMPORTANT NOTICE: This update procedure is for the FT-950 MAIN and EDSP software. The MAIN software is for all lot numbers. The EDSP software is different. Please verify the version of the radio by the serial number. The third and fourth digits indicate the lot number, example xx42xxxx. For lots 01 thru 42 proceed with MAIN and EDSP software update. For lots xx43xxxx and above install the MAIN only, do not install the EDSP software. You may also verify the current EDSP level of your radio (The software versions can be displayed on the radio, see the below instructions). If the first digit of the number is 2 (example 20.45 1.13) Do not install this update EDSP software, It is not compatible with EDSP level 2 radios. Radios with lot numbers 43 and above, cannot operate with EDSP Ver. 11.54 software. At this time (7/12/2010) there are no updates for EDSP level 2 radios. This procedure is used to update Main CPU Ver. 0115 and EDSP Ver. 11.54 the flash programming for the FT-950 Transceivers. Ver. 0115 MAIN CPU implements improvements (9/9/10) (This update Ver. 0115 MAIN CPU is for the FT-950 ALL lot numbers 01 to XX) • The “popping” sound audible during the FM mode CTCSS Tone Squelch setting procedure will no longer be heard when pressing any buttons, after the procedure is exited. Ver. 11.54 EDSP implements improvements (4/5/10) (This update Ver. 11.54 EDSP is only for the FT-950 lot numbers 01 to 42) • Corrected FM TX for a slight frequency offset. |